![background image](http://html1.mh-extra.com/html/omron/c200hw-srm21-v1-cs1w-srm21/c200hw-srm21-v1-cs1w-srm21_operation-manual_742333258.webp)
237
Connector Terminals
Section 5-2
Output Specifications
Note
When using the V and G terminals of the MIL connector, make sure that cur-
rent does not exceed 1 A at each terminal.
Slave Components
The following diagram shows the main components of the SRT2-OD32ML (-
@
) Connector Terminals with Transistor Outputs. The functions of these com-
ponents are described below.
Item
Specifications
Output current
0.3 max./point (4 A common) (See note.)
Residual voltage
OD32ML: 1.2 V max. (0.3 A DC between each output ter-
minal and G)
OD32ML-1: 1.2 V max. (0.3 A DC between each output
terminal and V)
Leakage current
OD32ML: 0.1 mA max.
OD32ML-1: 0.1 mA max.
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Insulation method
Photocoupler
Number of circuits
32 points/single common circuit
Communications Connector
Used to connect CompoBus/S communications data (BD H, BD L) and communications
power supply ( ). One compatible connector is provided as standard.
Indicators
Indicate the status of the Slave and communications, and output
status of each contact. (Lit when the input is ON.)
View from arrow (A)
(Top)
(A)
Output Connector (MIL Connector)
Connect 32 inputs with MIL Connector
XG4M-4030-T MIL Connector and compatible cable are
sold separately.
DIN Track Mounting Hook
Rotary Switch
Used to set the node number.
DIP Switch
The DIP switch's pins have the follow-
ing functions:
Pins 1 to 2: Reserved (Always OFF.)
Pin 3: Communications mode setting
Pin 4: Reserved (Always OFF.)
see page 256