Omron C200HW-SRM21-V1 CS1W-SRM21, Operation Manual

Page: 266 / 423

245
Connector Terminals Section 5-2
The pin numbers of the MIL connector corresponds to the following color
wires marked with color dots.
Dimensions
Note For details on wiring dimensions, refer to 5-2-3 SRT2-ID32ML (-1) Connector
Terminals with 32 Transistor Inputs .
Mounting Methods The following mounting methods are available. These methods are the same
as those used for mounting Connector Terminals with 8 or 16 inputs.
• DIN track mounting (with no mounting brackets): Refer to page 208.
• Vertical panel mounting (with Mounting Bracket B only): Refer to
page 210.
• Horizontal panel mounting (with Mounting Bracket B only): Refer to
page 210.
Note 1. The 32-point Connector Terminal cannot be directly panel-mounted with
screws. Use the SRT2-ATT02 Mounting Bracket B.
Pin Wire
color
Dots Dot
color
Pin Wire
color
Dots Dot
color
1 Light
brown
■
Black 21 Light
brown
■■■
Black
2 Red 22 Red
3 Yellow Black 23 Yellow Black
4 Red 24 Red
5 Light
green Black 25 Light
green Black
6 Red 26 Red
7 Gray Black 27 Gray Black
8 Red 28 Red
9 White Black 29 White Black
10 Red 30 Red
11 Light
brown
■■
Black 31 Light
brown
■■■■
Black
12 Red 32 Red
13 Yellow Black 33 Yellow Black
14 Red 34 Red
15 Light
green Black 35 Light
green Black
16 Red 36 Red
17 Gray Black 37 Gray Black
18 Red 38 Red
19 White Black 39 White Black
20 Red 40 Red
(Unit: mm)