![background image](http://html1.mh-extra.com/html/omron/c200hw-srm21-v1-cs1w-srm21/c200hw-srm21-v1-cs1w-srm21_operation-manual_742333081.webp)
60
Connector Installation (Special Flat Cable Only)
Section 3-2
Installation Procedure
Use the following procedure to attach a Extension Connector to the communi-
cations cable.
1,2,3...
1.
Make perpendicular cuts in the cables being connected. The cables will not
fit in the connector properly if the cuts are not straight and perpendicular.
2.
Snap Cover 1 onto one of the cables. Make sure that the hook locks into
place.
3.
Line up the end of Cover 1 with the end of the cable.
4.
Position Cover 1 onto Surface 1 of the contact block.
Note
The patterns of the contact blocks are different, so Cover 1 cannot be
fitted on Surface 2.
5.
Snap Cover 2 onto the other cable. Make sure that the hook locks into
place.
Correct
Incorrect
Hook
Cable
0.5 mm max.
Cover number
Cover 1
Cable
Contact block
Hook
Cable