![background image](http://html1.mh-extra.com/html/omron/c200hw-srm21-v1-cs1w-srm21/c200hw-srm21-v1-cs1w-srm21_operation-manual_742333235.webp)
214
Connector Terminals
Section 5-2
Note
This is the current consumption when all the maximum simultaneous output
points are ON, excluding the current consumption of external sensors.
Output Specifications
Note
When using the V and G terminals of the MIL connector, make sure that cur-
rent does not exceed 1 A at each terminal.
Terminal strength
Pulling: As stated below
Communications connector: 100 N
Cable connector: 40 N
MIL Connector: 100 N
Tightening: 0.25 N • m (for communications connector)
Node number settings
The node number is set on a DIP switch. (Set the node
number before turning ON the Slave.)
Weight
Approx. 75 g
Item
Specification
Item
VOD08S/VOD08S-1
VOD16ML/VOD16ML-1
Output current
0.3 A max./point
0.3 A max./point (2 A com-
mon) (See note.)
Residual voltage
VOD08S/VOD16ML:
1.2 V DC max. (between each input
terminal and G)
VOD08S-1/VOD16ML-1:
1.2 V DC max. (between each input
terminal and V)
Leakage current
VOD08S/VOD16ML:
0.1 mA max.
VOD08S-1/VOD16ML-1:
0.1 mA max.
ON delay time
0.5 ms max.
OFF delay time
1.5 ms max.
Insulation method
Photocoupler
Number of circuits
8 points/single common circuit 16 points/single common cir-
cuit