Oki Pro1040, Maintenance Manual

Page: 9 / 118

- 9 -
Paper Jams
⿟ Paper Jams
This section describes the procedure when paper is jammed inside the printer, when part of a piece of
paper that is being removed is left inside the printer, or when paper is left inside the printer because an
error occurred and caused printing to stop.
„
Condition of paper
Unload Stand-by Through paper
F0 roller F0 roller F0 roller
Unload: Indicates that the paper is not set on the F0 roller on the unwinder.
Stand-by: Indicates that paper is set on F0 roller on the unwinder.
Through paper: Indicates that paper is passing through the printer from the unwinder.
Checking Messages (if a paper jam occurs)
When paper is jammed inside the printer, or when paper is remaining inside the printer even after
removing it, a message notifying paper jam will appear on the display screen of the control panel, and
the ATTENTION lamp will blink. Or, when an error occurs causing printing to stop and leaves paper
inside the printer, an error notification message appears on the display screen on the control panel, and
the ATTENTION lamp blinks.
When ”Please see HELP for details” is shown in the message, pressing the <HELP> button in the control
panel will show the troubleshooting procedure, and you can easily solve the process according to the
guidance. Refer to ”Operating the Help screen” (P.11) for details.
Display screen
<HELP> button
ATTENTION lamp
The following table shows the messages. Check the message, and remove the jammed paper according
to the procedure described in the reference.