Oki Pro1040, Maintenance Manual

Page: 97 / 118

- 97 -
Printer Maintenance
Note
z
There are blades inside the cutter unit for cutting
roll paper. Do not touch the blades of the cutter
with your hands. There is a risk of injury.
„
Cleaning the fixed blade
Apply cleaning fluid (isopropyl alcohol) to
a cleaning swab and press it against the
straight blade (fixed blade) to remove glue
stuck to the blade.
Straight
blade
(fixed blade)
„
Cleaning the rotating blade
Apply cleaning fluid (isopropyl alcohol) to a
cleaning swab and press it against the spiral
blade (rotating blade) and move it back and
forth as you manually turn the gears so the
spiral blade faces towards the front so you
can remove any glue stuck to the blade.
Gear
Spiral blade (rotating blade)
Note
z
Confirm that there is no glue stuck to the blade of
the cutter. If there is any glue remaining, clean the
blades of the cutter again in the same way.
z
Confirm that there are no scraps or threads from
the cloth left inside the blades of the cutter or the
cutter unit. If there are any left, wipe the machine
again.
z
After cleaning, wipe the machine dry.
z
There are blades inside the cutter unit for cutting
roll paper. Do not touch the blades of the cutter
with your hands. There is a risk of injury.
z
Cleaning swabs are standard products for cleaning.
Contact your retailer to purchase cleaning swabs.
8
Clean the F1 roller unit.
The F1 roller unit feeds paper through
the cutter unit. When cleaning the
cutter blades, check the surfaces of the
top and bottom rollers of the F1 roller
unit and clean them if there is any glue,
paper dust, or scraps of paper on the
surfaces of the top and bottom rollers.
Rotate the gears with one hand and use
your other hand to clean with a soft
cloth to which cleaning fluid (isopropyl
alcohol) has been applied.
When wiping, wipe in one direction, and
never wipe back and forth.
Lower the levers on both sides to rotate
both the top and bottom rollers at the
same time.
Gear
Cleaning the lower roller
Gear
Cleaning the upper roller