Oki Pro1040 Maintenance Manual Download

Page: 4 / 118

- 4 -

Illustrations

Unless otherwise specified, the printer illustrations used herein show the printer with the unwinder

mounted.

Illustrations may differ from the actual product.

Screens

The images of the control panel and PC used herein are examples. The images may differ from actual

products and screens.

Inscriptions

The following inscriptions are used in this manual.

Microsoft

Windows

10 64-bit Edition operating system

→

Windows 10 (64-bit version)

Microsoft

Windows

10 operating system

→

Windows 10

Unless otherwise specified, the examples in the manuals included with the printer show operation using

Windows 10 and the Pro1050 printer.

Depending on the OS, model, and version you are using, descriptions in this manual may differ from

what you actually encounter.

Summary of Contents for Pro1040























































































































Search results

Summary of Contents for Pro1040

Reviews:

Related manuals for Pro1040

Brands by name

Popular brands

Oki Pro1040, Maintenance Manual

Search results

Summary of Contents for Pro1040

Reviews:

Related manuals for Pro1040

Brands by name

Popular brands