Oki Pro1040, Maintenance Manual

Page: 111 / 118

- 111 -
Specifications
„
Full sheet labels (normal printing)
W1
W6 W5
W2
D
C
L
4
L
5
L
2
L
2
B
A
B
L
2
A
A
B
L
6
Paper
feed di
rection
Printing range
Liner
Winding direction
Outside winding: Printable surface faces out.
Inside winding: Printable surface faces in
Paper weight 0.07 to 0.25 mm (0.003 to 0.0098 inches)
Core Inner diameter: 76.2 mm (3 inches)
Outer diameter 203.2 mm (8 inches) or less
Other W1 : Liner width 29.4 to 130 mm (1.1575 to 5.12 inches)
W2 : Label width 25.4 to 126 mm (1 to 4.9606 inches)
W5 : Left liner area (dry edge) 2 to 25.4 mm (0.0787 to 1 inch)
W6 : Right liner area (dry edge) 2 to 25.4 mm (0.0787 to 1 inch)
L2 : Paper length 12.7 to 1320.8 mm (0.5 to 52 inches)
L4 : Cut size when in cut mode
101.6 mm (4 inches) or more
However, if the length of one label is less than 101.6 mm
(4 inches), then the shortest length is 101.6 mm
(4 inches) as multiple sheets are cut
L5 : Upper edge cutting margin 2.12 mm (0.0835 inches)
L6 : Lower edge cutting margin 2.12 mm (0.0835 inches) or more
A : Top margin 2.12 mm (0.0835 inches) or more
B : Bottom margin 2.12 mm (0.0835 inches) or more
C : Left margin 2.12 mm (0.0835 inches) or more
D : Right margin 2.12 mm (0.0835 inches) or more