background image

- 89 -

Printer Maintenance

30 

Put the print cartridge set back into the 

printer.

Note

 

z

There is a risk of pinching your fingers or hands 

when repositioning the print cartridge set. Hold the 

handle parts of the basket for this operation.

31 

Close the top cover.

Note

 

z

When closing the top cover, there is a risk of 

pinching your fingers or hands in the top cover or 

the top cover's support. Press on the top of the top 

cover to close it.

 

z

There is a risk of pinching your fingers or hands if 

you hold the LED head while closing the top cover. 

Press on the top of the top cover to close it.

Cleaning LED Heads

Clean the LED heads if the print results are 

blurry, white stripes appear, or if text is bleeding.

Clean the LED heads if the printed results show 

lengthwise white lines, if images are omitted 

lengthwise, or if there is bleeding around text. If 

the LED heads are dirty, it could cause a paper 

jam.

Note

 

z

Do not use methyl alcohol or thinner. Doing so could 

damage the LED heads.

Press and hold the <POWER> button 

for approximately 1 second to switch off 

the power supply.

Wait a moment, and the LED lamp on 

the <POWER> button will turn OFF.

Grasp the top cover open lever and 

open the top cover.

Summary of Contents for Pro1040























































































































Reviews: