Oki Pro1040, Maintenance Manual

Page: 63 / 118

- 63 -
Replacing Consumables
Note
z
Be careful not to touch the nearby terminals while
turning the belt locking key.
16
Put the print cartridge set back into the
printer.
Note
z
There is a risk of pinching your fingers or hands
when repositioning the print cartridge set. Hold the
handle parts of the basket for this operation.
17
Close the top cover.
Note
z
When closing the top cover, there is a risk of
pinching your fingers or hands in the top cover or
the top cover's support. Press on the top of the top
cover to close it.
z
There is a risk of pinching your fingers or hands if
you hold the LED head while closing the top cover.
Press on the top of the top cover to close it.
18
Please support the recycling of used
belt units and 2nd transfer rollers.
Note
z
You cannot clean the belt unit yourself.
To protect the equipment against dirt and foreign
matter, do daily maintenance (cleaning) as
described in “Printer Maintenance” (P.73) .
Also, do not use alcohol or other solvents to wipe
the surfaces. If alcohol or some other solvent is
used to wipe it, the irregularities left from wiping it
will degrade print quality.
z
Do not disassemble the belt unit and the waste
toner box, and do not force them open. Doing so
may cause toner to spray out, to be inhaled, or to
soil your clothing and hands.
Memo
z
If you must dispose of a used belt unit or 2nd
transfer roller, put them in a plastic bag and be sure
to dispose of them according to the local laws and
government regulations.
z
Use the box and packing bag from the new belt unit
and 2nd transfer roller for when the used belt unit
and 2nd transfer roller are recycled.