Oki OKIFAX 5780 Options Manual Download Page 58

Page: 58 / 114

OKIFAX 5780/5980

Confirming e-mail Address Programming

If you want to check / verify an e-mail address you have
programmed, print the Telephone Directory.

See the User’s Guide, “Reports, Telephone Directory.”

E-mail Address Restrictions

up to 64 characters may be entered.

You may use Latin letters, numbers and symbols.

To enter symbols, use either one-touch key 20 or key “0”
of the numeric ten-key pad.

The symbols that can be used are:

! # & ’ ( ) * + , - . / : ; = ? · @ ? ” _ % ~

The “~” (tilde) symbol shows on the display as “

-1

”.

Both uppercase and lowercase letters can be used.

To change the case, press the CAPS key
(one-touch key 31).

Must be programmed / assigned to Speed Dial keys
01~50 (5780) or 1~90 (5980).

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands