Oki OKIFAX 5780 Options Manual Download Page 105

Page: 105 / 114

T.37 Option Guide: English

105

PDF files are not received.

PDF files cannot be received.

PDF files can be sent.

You want a different format for the Return Receipt.

To receive a Return Receipt, your machine must make a
Return Receipt request.

Receipt Format determines the format of the Return
Receipt.

Two settings are available: MDN and TEXT

MDN

MDN is

the format specified by RFC

supported by Netscape Messenger

supported by Microsoft Outlook

A mailer that does not recognize MDN may not display
the receipt properly.

TEXT

Set to TEXT, your machine immediately prints the
Return Receipt, when the receipt is delivered.

The Message Disposition Notification (MDN) does not
display all of the information about the original message.

The MDN does not display all of the information about
the original message.

The transmission record does not display any Message
Disposition Notifications (MDNs).

Message Disposition Notifications (MDNs) are not
shown in the transmission record.

Is it necessary to set the Domain Name (User Function 91)?

SMTP

User Function 91, Domain Name, must be set for
Email to FAX (SMTP) communications.

POP

User Function 91, Domain Name, does not have to
be set for normal POP communications.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands