Oki OKIFAX 5780 Options Manual Download Page 62

Page: 62 / 114

OKIFAX 5780/5980

List of e-Mail Options

1 TO

2 CC

3 FROM

4 SUBJECT

5 SEND FILE FORMAT

6 SENDER ID(EMAIL)

7 RETURN RECEIPT

8 COMFIRM REPORT

9 DISPLAY (TO:)

10 DISPLAY (CC:)

11 DISPLAY (FROM:)

Descriptions of e-Mail Options

1 TO

Use this option to select a One-Touch, Speed Dial, or
Group.

Whatever you select MUST be programmed with an
email before you select it.

2 CC

Use this option to select a One-Touch, Speed Dial, or
Group.

Whatever you select MUST be programmed with an
email before you select it.

3 FROM

The “From” section of an e-mail is either the default
e-mail address of the sending machine OR an e-mail
address programmed to a One-Touch key.

Use this option to select the One-Touch key programmed
with the sender’s address.

Program your own e-mail address as a One Touch or
Speed Dial number. This saves time when you are
working with e-mail.

If you want replies (to emails you have sent) to go to
your computer, program your computer e-mail address
as a One-Touch or Speed Dial number.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands