Oki OKIFAX 5780 Options Manual Download Page 7

Page: 7 / 114

T.37 Option Guide: English

Operation Overview (End User)

Information Provided

The following items provide the information you will need to
use your fax machine.

User’s Guide

Warranty Document

Option Guide(s)

OKILAN 7100e+ User’s Guide

Software Utilities CD-ROM

General Conditions

To use Internet Fax,

a Network Card must be installed in the machine

the machine must be connected to a LAN

The Network Card for this machine can be connected to a

10 BaseT

100baseTX LAN.

To make a LAN connection, the following information must
be configured on this machine. Ask your network
administrator about these settings.

an IP Address

SubnetMask

Default Gateway

If the LAN uses a DHCP server, it is not necessary to
configure these settings as the server will do it automatically.

Internet Fax settings can be configured either using the
network tool or on the machine itself, but DHCP settings are
supported by the network tool only.

After setting the correct IP Address, SubnetMask and Default
Gateway, configure the machine for Internet Fax
transmission/reception.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands