Oki OKIFAX 5780 Options Manual Download Page 87

Page: 87 / 114

T.37 Option Guide: English

Image Resolution

The setting for User Function 89: Ex.Fine Mode adjusts the
resolution of the scanned image.

The resolution may be set between 300 and 600 dpi.

The OKI HRS600 (600 dpi TX) option (8 MB of
memory) must be installed to achieve 600 dpi scan
resolution.

Sender ID (EMAIL)

User Function 90: Sender ID must be set to ON when you are
using your fax machine for faxing using the Internet. This
places the Sender ID on the top of any documents you send.

However, when you are using your fax machine as a network
scanner, you do not want this information to appear on your
scanned documents.

Set User Function 90: SENDER ID to OFF while using
your fax machine as a network scanner.

The Sender ID will not appear at the top of scanned
documents.

Be sure to set Sender ID to ON when sending faxes.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands