Oki OKIFAX 5780 Options Manual Download Page 112

Page: 112 / 114

OKIFAX 5780/5980

112

I’ve entered the DNS name of the SMTP server, but it
doesn’t work.

Try entering the IP address.

I’ve changed the settings for the network card (User
Function 98), but the changes are not being implemented.

Did you press MENU while the initialization message
was displayed?

Pressing MENU while the initialization message is on
display (after changing the settings) will cause the
machine to “lose” the setting changes and the settings
will not update correctly.

My server does not support APOP, and my fax machine is
experiencing communication errors

Make sure the OKIVIEW 32 Setting, Use APOP, is set to
OFF.

This setting is available when you are using a POP server
that supports APOP.

With APOP, the POP password will be encrypted before it
is sent.

A communication error will occur if this setting is turned
on when using a server which does not support APOP.

Refer to “Setting Up on a Network, Using the
OKILAN 7100e+ Web Page, Changing the Settings
Using the Web Page.”

My machine won’t receive Internet Faxes while a print
alarm (e.g., no paper, cover open, paper jam) is exists.

Change User Function 86, Text Print to OFF.

Your machine will receive Internet Faxes while a print
alarm exists.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands