Oki OKIFAX 5780 Options Manual Download Page 44

Page: 44 / 114

OKIFAX 5780/5980

12: DSN (Delivery Status Notification)

MDN vs. DSN

MDN = Message Disposition Notification

DSN = Delivery Status Notification

MDN: you receive a confirmation that your message
was received by the destination mail server.

DSN: you receive a confirmation that your message was
opened by the person you sent it to (the recipient).

All systems involved in the communication must support
MDN and DSN.

When a mail server with DSN receives a message, it
sends a delivery confirmation to the sender of the
message.

Change this setting to OFF, if you are sending a message
to a mail server that does not support DSN.

If you do not change this setting to OFF, the server may
not be able to handle the message correctly and a
communication error may occur.

Some servers can send mail to servers without DSN.
In this case, no delivery notification will be sent.

The default setting is OFF.

User Function 86, TEXT PRINT must be ON for your
machine to receive and print delivery notifications.

When User Function 98, Network Settings, DSN is ON,
your machine receives confirmations (DSN) from the
mail server of anyone sent a message by your machine.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands