background image

|

OKIFAX 5780/5980

54

General

Set the password.

TCP/IP

Allows you to modify the settings listed below.

a.

Enable DHCP/BOOTP or RARP

b.

IP Address, Subnet mask and Default Gateway

c.

Enable Banner for FTP/LPR

d.

DNS settings

NetWare

Allows you to modify the NetWare server settings.

Please note that the position of the Pserver menu is
different for Internet Fax, and so is the method for setting
Pserver NDS and Bindery.

!

See the OKILAN 7100e+ User’s Guide, “OKILAN
Configuration, Setting Up the OKILAN 7100e+ Using
OKIVIEW 32” or the OKIVIEW 32 on-line Help.

EtherTalk

Not used by this machine.

NetBEUI

See the OKILAN 7100e+ User's Guide.

SNMP

See the OKILAN 7100e+ User's Guide.

The Printer TRAP facility of the tool supplied with
Internet Fax has been expanded.

You can add up to 5 addresses in TCP/IP as Printer Traps
and also an extra address in IPX/SPX, for which trap
alarms can be specified individually.

Please also see the help menu of the tool.

Internet Fax

You can use OKIVIEW 32 to change the same settings
that are accessed through the Web page
(User Function 98, Network Settings).

Summary of Contents for OKIFAX 5780



















































































































Reviews: