Oki OKIFAX 5780 Options Manual Download Page 42

Page: 42 / 114

OKIFAX 5780/5980

7: POP PASSWORD

Enter the password registered on the POP3 server.

If a password has already been entered, it is shown as
XXXXXXXXXXXXXXXX (sixteen Xs).

Restrictions

up to 16 characters may be entered.

You may use Latin letters, numbers and symbols.

To enter symbols, use either one-touch key 20 or
key “0” of the numeric ten-key pad.

The symbols that can be used are: ! # & ’ ( ) * + , - . /
: ; = ? · @ ? ” _ % ~

The “~” (tilde) symbol shows on the display as “

-1

”.

Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).

8: DNS P .SRV ADDRESS

DNS means Domain Name Service.

P.SRV means Primary Server.

Sets the IP address of the DNS primary server.

You do not have to change this setting if the server is
connected directly using its IP address.

9: DNS S .SRV ADDRESS

DNS means Domain Name Service.

S.Serv means Secondary Server.

Sets the IP address of the DNS secondary server.

You change this setting only when a secondary server has
been set up.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands