Oki OKIFAX 5780 Options Manual Download Page 36

Page: 36 / 114

OKIFAX 5780/5980

Receipt Format
User Function 93

This function determines the format of the Return Receipt
Confirmation (MDN).

Available settings are: Text or MDN.

TEXT: The format that might typically be displayed by a
program such as Microsoft Outlook

MDN: The format based on the RFC for MDN (Message
Disposition Notification).

Default is TEXT.

Send File Format
User Function 94

This function determines the format of an e-mail sent from
the T.37 machine. The format can be TIFF or PDF.

Available settings are: TIFF or PDF.

Default is TIFF

If the receiver is another OKI T.37 device, the format
must be TIFF.

POP GW Setting
User Function 95

To use the POP Gateway Service, both a Subject and
Password must registered.

User Function 95, POP GW Setting allows you to register the
Subject and Password.

Both the Subject and Password can be no more that 20
characters.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands