Oki OKIFAX 5780 Options Manual Download Page 88

Page: 88 / 114

OKIFAX 5780/5980

Network Printing

Printing Documents

To use your fax machine to print documents via the LAN,
you need to install the appropriate software from the supplied
CD-ROM and make the correct settings for your environment.

A brief description of each of the supported operating
systems and the suggested installation procedure appears in
this section.

When installing network card utilities, select the Quick Setup
option where it is available.

The printer driver provided on the CD-ROM supports
only network printing.

Printing via the parallel port is not supported.

Local printing through the parallel port requires a
different driver (provided with the optional MFP Kit).

For further details, please contact your authorized
supplier.

Printing on Transparencies

When printing on transparencies,

set the Media Type to Light

use manual feed

set the machine for face-up stacking

recommended transparency type is 3M CG2300

Change the settings through the printer driver, (provided with
the optional MFP Kit).

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands