Oki OKIFAX 5780 Options Manual Download Page 14

Page: 14 / 114

OKIFAX 5780/5980

Option Guides

The Option Guides provide the information unique to each
option of the product series.

One Option Guide covers four of the available options:

Second Paper Tray
MemoryOptions
OKI HRS600 [600 dpi Transmission]
Handset

Second Paper Tray

This section provides the information about the second
paper tray option for the product series.

Memory Options

This section provides the information about the memory
options for the product series.

OKI HRS600 (600 dpi Transmission)

This section provides the information about the 600 dpi
Transmission option for the product series.

Handset

This section provides the information about the handset
option for the product series.

Dual Line

This guide provides the information unique to the Dual
Line configuration of the product series.

T.37 Internet Fax

This guide provides the information unique to the T.37
Internet Fax configuration of the product series.

There are two versions of the T.37 Option Guide.

One is for the OKIFAX 5750/5950 series machines.

One is for the OKIFAX 5780/5980 series machines.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands