Oki OKIFAX 5780 Options Manual Download Page 40

Page: 40 / 114

OKIFAX 5780/5980

Explanation of Settings

1: IP ADDRESS

Sets the IP address.

2: SUBNETMASK

Sets the subnet mask.

3: DEFAULT GATEWAY

Sets the default gateway address.

4: SMTP SERVER NAME

Enter either the IP address or the host name of the SMTP
mail server.

If the DNS name of the SMTP server does not work,
try entering the IP address of the SMTP server.

Restrictions

If DNS has been set, use the host name (e.g.,
mail.network.com).

If DNS has not been set, enter the IP address of the
server. The address must include the “.” (period)
dividers (e.g., 192.168.4.123).

up to 64 characters may be entered.

You may use Latin letters, numbers and symbols

To enter symbols, use either one-touch key 20 or
key “0” of the numeric ten-key pad.

The symbols that can be used are: ! # & ’ ( ) * + , - . /
: ; = ? · @ ? ” _ % ~

The “~” (tilde) symbol shows on the display as “

-1

”.

Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands