Oki OKIFAX 5780 Options Manual Download Page 111

Page: 111 / 114

T.37 Option Guide: English

111

When I scan documents, my fax machine sender ID is
included.

Check the setting for User Function 90: Sender ID
(E-Mail).

Make sure it is OFF.

This function determines if the sender ID is included
with images scanned by the Internet Fax.

Available settings are: ON or OFF.

The default setting is ON.

The setting for this function always applies when using
Internet Fax.

Sender ID (E-Mail) [User Function 90] is independent
from Sender ID On/Off (User Function 23).

If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.

My fax machine sender ID is not included in documents I
am sending.

Check the setting for User Function 90: Sender ID
(E-Mail).

Make sure it is ON.

This function determines if the sender ID is included
with images scanned by the Internet Fax.

Available settings are: ON or OFF.

The default setting is ON.

The setting for this function always applies when using
Internet Fax.

Sender ID (E-Mail) [User Function 90] is independent
from Sender ID On/Off (User Function 23).

If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands