Oki OKIFAX 5780 Options Manual Download Page 32

Page: 32 / 114

OKIFAX 5780/5980

Extra Fine Mode
User Function 89

This function determines the scan resolution of the EX.FINE
mode for Internet Faxing.

Available settings are: 300 dpi or 600 dpi.

The default setting is 300 dpi.

If you want to use 600 dpi scan resolution, the OKI
HRS600 (600 dpi TX) option (8 MB RAM) must be
installed.

Sender ID (e-mail)
User Function 90

This function determines if the sender ID is included with
images scanned by the Internet Fax.

Available settings are: ON or OFF.

The default setting is ON.

The setting for this function always applies when using
Internet Fax.

The Sender ID (User Function 90) is independent from
Sender ID On/Off (User Function 23). User Function
23, Sender ID On/Off is for G3 transmissions.

If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands