Oki OKIFAX 5780 Options Manual Download Page 63

Page: 63 / 114

T.37 Option Guide: English

4 SUBJECT

Use this option to enter a subject of up to 64 characters.

5 SEND FILE FORMAT

Use this option to select the type of file your document
will be converted to: TIFF or PDF.

6 SENDER ID (EMAIL)

Use this option to select the whether or not the email
sender ID will be printed at the top of the page on the
receiving end

If ON is activated, the email sender ID prints.

7 RETURN RECEIPT

Use this option to have your machine request a
confirmation (MDN) from the recipient’s machine that
the document was read.

8 CONFIRM REPORT

Use this option to have your machine print a report of
locations entered in the TO, CC, FROM, and SUBJECT
fields.

9 DISPLAY (TO:)

Use this option to display the list of locations entered for
this field.

To return to the previous menu, press

§ or Stop.

10 DISPLAY (CC:)

Use this option to display the list of locations entered for
this field.

To return to the previous menu, press

§ or Stop.

11 DISPLAY (FROM:)

Use this option to display the list of locations entered for
this field.

To return to the previous menu, press

§ or Stop.

Summary of Contents for OKIFAX 5780



















































































































Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands

Oki OKIFAX 5780, Options Manual

Search results

Summary of Contents for OKIFAX 5780

Reviews:

Related manuals for OKIFAX 5780

Brands by name

Popular brands