Oki MC160N, User Manual, Page: 80 / 268

80 Media Handling
DO NOT use thick stock that is
„
Mixed with any other media in the trays (as this will cause media missfeed-
ing)
Label
A sheet of labels consists of a face sheet (the printing surface), adhesive, and a
carrier sheet:
„
The face sheet must follow the plain paper specification.
„
The face sheet surface must cover the entire carrier sheet, and no adhesive
should come through on the surface.
You can print continuously with label sheets. However, this could affect the media
feed, depending on the media quality and printing environment. If problems
occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement. Check
your application documentation for more information on printing labels.
Use label sheets that are
„
Recommended for laser printing
DO NOT use label sheets that
„
Have labels that easily peel off or have parts of the label already removed
„
Have backing sheets that have peeled away or have exposed adhesive
"
Labels may stick to the fuser, causing them to peel off and media mis-
feeds to occur.
Capacity Tray 1 Up to 50 sheets, depending on their thick-
ness
Tray 2 Not supported
Orientation Face up
Driver
Media Type Labels
Duplexing Not supported