140
Using the Scanner
Registering in the Favorite List
From the speed dial destinations and group dial destinations registered on this
machine, register a maximum of 20 destinations in the favorite list for convenient
access to frequently specified destinations. Follow the procedure described
below to register an address (e-mail address, FTP address or SMB address) on
the favorite list.
1
In the main screen (Scan mode), press the up or down arrow key to select
UTILITY, and then press the Enter
key.
2
Press the up or down arrow key to select DIAL REGISTER, and then press
the Enter
key.
3
Press the up or down arrow key to select FAVORITE, and then press the
Enter
key.
"
If data is already registered on the favorite list, continue with step 7
after completing step 3.
4
Press the Address book key to switch between SPEED DIAL and GROUP
DIAL.
5
Use the keypad to type in the number (between 1 and 250) for the speed dial
destination or the number (between 1 and 20) for the group dial destination to
be registered on the favorite list, and then press the Enter
key.
The information registered for the selected speed dial destination or group
dial destination appears.
6
Press the Enter
key again.
7
To register another address, press the up or down arrow key to select ADD,
press the Enter
key, and then repeat the procedure from step 4.
8
To finish registering addresses, press the up or down arrow key to select FIN-
ISH, and then press the Enter
key.
Deleting From the Favorite List
Registered information can be deleted from the favorite list.
"
Changes made with this procedure will not be applied to the original data
(speed dial destination, group dial destination, etc.).
1
In the main screen (Scan mode), press the up or down arrow key to select
UTILITY, and then press the Enter
key.
2
Press the up or down arrow key to select DIAL REGISTER, and then press
the Enter
key.
3
Press the up or down arrow key to select FAVORITE, and then press the
Enter
key.
Summary of Contents for MC160N
