Oki MC160N, User Manual, Page: 242 / 268

242 Troubleshooting
OUTPUT TRAY FULL
REMOVE PAPER
The output tray is
full of paper. Remove all paper from
the output tray.
OVER SEARCH TIME Communication with
the LDAP server
has timed out. Establish a connection
with the LDAP server
again.
PAPER EMPTY
LOAD PAPER (
2
xx)
Tray 2 has run out
of paper. Load media into the
tray.
PAPER SIZE ERROR
RESET PAPER (xxx)
The size of paper
being printed on is
different from the
size of paper speci-
fied in the printer
driver. Press the Start key to
cancel the caution.
To print on paper of the
size specified in the
printer driver, load
paper of the correct
size into the specified
tray, and then try per-
forming the print job
again.
PC CONNECTION FAILED While data was
being sent in Scan
mode, the connec-
tion to the computer
was interrupted. Check the connection
with the computer and
the scanner driver sta-
tus, and then try send-
ing the data again.
Process Caution - IDC A process error
occurred in the
machine. Open and close the
scanner unit.
PROCESS ERROR-xxx
CLEAR BY COVER
REMOVE ORIGINAL
IN ADFR
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass. Place the document on
the original glass.
RESULTS ARE OVER xxx The LDAP search
results exceed the
maximum specified
with MAX. SEARCH
RESULT in the
LDAP SETTING
menu. Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
This message... means... Do this...