manualshive.com logo in svg

Oki MC160N, User Manual, Page: 55 / 268

Share
Download
Oki MC160N User Manual Download Page 55

55

Control Panel and Configuration Menu

SNMP

Setting

DISABLE / 

ENABLE

Select whether or not to enable SNMP.

SPEED/DUPLEX

Setting

AUTO

 / 10BASE-T FULL / 

10BASE-T HALF / 
100BASE-TX FULL / 
100BASE-TX HALF

Specifies the transmission speed for the 
network and the transmission method for 
bi-directional transmission. 

E-MAIL 
SETTING

SMTP

Setting

DISABLE / 

ENABLE

Select whether to enable or disable 
e-mail transmission operations for this 
machine.

SENDER NAME

Specify the name of the E-mail sender 
(up to 20 characters) used for network 
scanning.

The default setting is “

OKI-MC160n

”.

E-MAIL ADDRESS

Specify the E-mail address (up to 64 
characters) of the E-mail sender used for 
network scanning.

The default setting is blank.

DEFAULT SUBJECT

Specify the subject (up to 20 characters) 
of the E-mail message used for network 
scanning.

The default setting is “

From 

OKI-MC160n

”.

SMTP SERVER 
ADDR.

Specify the IP address or host name (up 
to 64 characters) for the SMTP server.
The default setting is “

0.0.0.0

”.

SMTP PORT NO.

Setting

1 to 65535 (Default: 

25

)

Specify the port number communicating 
with the SMTP server.

Summary of Contents for MC160N













































































































































































































































































Reviews:

No comments