Oki MC160N, User Manual

Page: 130 / 268

130 Using the Scanner
Specifying the Data Location
Select whether the computer or USB memory device is the location where scan
data is to be saved. When transmitting via a network, refer to “Specifying the
Destination Address (Scan to E-mail/FTP/SMB)” on page 132.
"
If an address has been specified as the destination for the data, SCAN
TO PC and SCAN TO USB MEMORY cannot be selected.
Saving Data on a Computer Connected (Scan to PC)
In order to perform Scan to PC operations, the following requirements must be
met.
z
This machine is connected to a computer using a USB cable.
z
The TWAIN scanner driver, the printer driver and Scanner Utility (Win-
dows only) are installed on the computer.
z
Either the Scanner Utility is activated or the Scanner Utility icon appears
in the Windows notification area.
z
The document is positioned at the location specified with Paper Source
( Flatbed (original glass) or ADF ) in the Scanner Utility.
"
For details on the Scanner Utility, refer to the online help.
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
"
The scan settings specified with the Scanner Utility are given priority.
1
In the main screen (Scan mode), press the up or down arrow key to select
SCAN TO, and then press the Enter
key.
2
Press the up or down arrow key to select SCAN TO PC, and then press the
Enter
key.
"
The scan data is saved in the folder specified with the Scanner Utility.