Oki MC160N Page 127 User Manual Download

Page: 127 / 268

127

Using the Scanner

Image size

Shows the data size of the scan image.

Rotation

Select the orientation of the image to be scanned.

Click to close the TWAIN driver window.

Prescan

Click to begin scanning a preview image.

Scan

Click to begin scanning.

AutoCrop icon

Click to automatically detect the scanning position based on the preview
image.

Zoom icon

Click to rescan the area selected in the preview window and enlarge it to fit
the window.

Mirror icon

Click to display a mirror image of the preview image.

Tone Reversal icon

Click to reverse the colors of the preview image.

Clear icon

Click to erase the preview image.

Preview window

Displays a preview image. Drag the rectangle over the image to select an
area.

Before/After (RGB)

Move the pointer in the preview window to display the color tones at the
pointer’s position before and after adjustments.

Width/Height

Displays the width and height for the selected area in the selected measure-
ment units.

Summary of Contents for MC160N













































































































































































































































































Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands

Oki MC160N, User Manual

Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands