manualshive.com logo in svg

Oki MC160N, User Manual, Page: 237 / 268

Share
Download
Oki MC160N User Manual Download Page 237

237

Troubleshooting

Status, Error, and Service Messages

Status, error, and service messages are displayed in the message window. They 
provide information about your machine and help you locate many problems. 
When the condition associated with a displayed message has changed, the mes-
sage is cleared from the window.

Status Messages

This message...

means...

Do this...

(Nothing displayed)

The machine is in Energy 
Save mode to reduce 
power consumption during 
periods of inactivity.

No action needed.

ACCEPTED

The settings were applied.

DATA RECEIVING

This machine is receiving 
data.

NONE

The object does not exist.

PC SCAN CANCEL

The scan job was can-
celed from the driver.

PLEASE WAIT!

The AIDC color calibration 
is being performed.

The AIDC color calibration 
is performed automatically 
in the following circum-
stances.

„

When the machine is 
turned on

„

When the machine 
recovers from Energy 
Save (Sleep) mode

„

When the machine is 
restarted after settings 
have been changed

„

After a toner cartridge is 
replaced

This process maintains 
optimum print quality.

PRINT WAITING

The machine is waiting to 
print.

PRINTING

The machine is printing.

Summary of Contents for MC160N













































































































































































































































































Reviews:

No comments