Oki MC160N Page 34 User Manual Download

Page: 34 / 268

Control Panel and Configuration Menu

TONER REMAINING

A general estimate of the amount of toner remaining in the toner cartridges can
be viewed.

If the Enter key is held down for at least 2 seconds while the screen
described above is displayed, the configuration page will be printed.

T/C CHANGE

REPLACE MODE

Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner car-
tridge.

For details on replacing a toner cartridge, refer
to “Replacing a Toner Cartridge” on page 154.

To return to normal operation mode from
REPLACE MODE, press the Stop/Reset
key.

EJECT MODE

Switches the machine to the EJECT MODE.
This mode is used when replacing all toner car-
tridges at the same time.

For details on replacing all toner cartridges,
refer to “Replacing All Toner Cartridges at the
Same Time” on page 161.

To return to normal operation mode from
EJECT MODE, press the Stop/Reset
key.

Summary of Contents for MC160N













































































































































































































































































Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands

Oki MC160N, User Manual

Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands