Oki MC160N, User Manual, Page: 138 / 268

138 Using the Scanner
1
In the main screen (Scan mode), press the up arrow or down arrow key to
select the current data destination setting, and then press the Enter
key.
2
Press the up or down arrow key to select ADD, and then press the Enter key.
3
Specify the destination address.
"
For details on typing in an e-mail address, refer to “Directly Entering
the E-mail Address” on page 132.
For details on selecting from the favorite list, refer to “Selecting From
the Favorite List” on page 133.
For details on selecting a speed dial destination, refer to “Selecting a
Speed Dial Destination” on page 133.
For details on selecting a group dial destination, refer to “Selecting a
Group Dial Destination” on page 134.
For details on selecting from the address book, refer to “Selecting
From the Address Book” on page 135.
For details on searching the address book, refer to “Searching the
Address Book” on page 135.
For details on searching an LDAP server, refer to “Searching an LDAP
Server” on page 136.
Editing a Specified Destination Address
A specified destination e-mail address can be edited.
"
FTP addresses, SMB addresses and addresses registered as speed dial
destinations or group dial destinations cannot be edited.
1
In the main screen (Scan mode), press the up arrow or down arrow key to
select the current data destination setting, and then press the Enter
key.
2
Press the up or down arrow key to select CHECK/EDIT, and then press the
Enter
key.
3
Press the up or down arrow key to select the e-mail address to be edited, and
then press the Enter
key.
4
Use the keypad to edit the e-mail address, and then press the Enter key.
"
For details on entering/editing text, refer to “Entering Text” on
page 265.
5
To finish editing addresses, press the Back key.
6
Press the up arrow or down arrow key to select FINISH, and then press the
Enter
key.