manualshive.com logo in svg

Oki MC160N, User Manual, Page: 203 / 268

Share
Download
Oki MC160N User Manual Download Page 203

203

Troubleshooting

Understanding the Media Path

Understanding the media path will help you locate media misfeeds.

1. ADF media feed rollers

2. Document feed tray

3. Document output tray

4. Output tray

5. Imaging cartridge

6. Toner cartridge carousel

7. Tray 1 (multipurpose tray)

8. Tray 2 (optional lower feed unit)

9. Fuser unit

10. Duplex (optional)

Clearing Media Misfeeds 

To avoid damage, always remove missfed media gently, without tearing it. Any 
piece of media left in the machine, whether large or small, can obstruct the media 
path and cause further misfeeds. Do not reload media that has missfed.

Note

The image is not fixed on the media before the fusing process. If you touch the 
printed surface, the toner may stick to your hands, so be careful not to touch the 
printed face when removing the missfed media. Make sure not to spill any toner 
inside the machine. 

4

9

10

5

6

7

8

1

2

3

Media path

Document path

Summary of Contents for MC160N













































































































































































































































































Reviews:

No comments