Oki MC160N Page 112 User Manual Download

Page: 112 / 268

112

Using the Copier

Press the up arrow or down arrow key to select MANUAL, and then press the
the up arrow or down arrow key

Use the keypad to type in the desired zoom ratio, or press the up arrow or
down arrow key to specify the zoom ratio, and then press the Enter

key.

The main screen (Copy mode) appears again.

Each press of the up arrow or down arrow key changes the zoom ratio
by 1%.
A setting between 50% and 200% can be specified.

Selecting the Media Tray

If an optional lower feeder unit is not installed, this setting is not available.

In the main screen (Copy mode), press the up arrow or down arrow key to
select the current media tray setting, and then press the Enter

key.

Press the up arrow or down arrow key to select the desired media tray, and
then press the Enter

key.

The main screen (Copy mode) appears again.

If no paper is loaded in Tray 2, EMPTY appears to the right of the
media size.

Summary of Contents for MC160N













































































































































































































































































Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands

Oki MC160N, User Manual

Search results

Summary of Contents for MC160N

Reviews:

Related manuals for MC160N

Brands by name

Popular brands