Oki C7300, User Manual

Page: 59 / 216

SETTING UP > 59
IEEE1394 menu
(Only displayed if IEEE 1394 is installed.)
Network menu
(Only displayed if a network card is fitted.)
Item Value Description
SPEED
S100; S200;
S400
Sets the upper limit of transfer speed
in communication layer.
(S400: 400MB/Sec. or less).
Display is in English only.
SBP2
Enable ; Disable Enables/disables SBP2 protocol.
Item Value Description
TCP/IP
Enable ; Disable Selects TCP/IP protocol.
NETWARE
Enable ; Disable Selects Netware protocol.
ETHERTALK
Enable ; Disable Selects EtherTalk protocol.
NETBEUI
Enable ; Disable Selects NetBEUI protocol.
FRAME TYPE
Auto ; 802.2; 802.3
Ether-II; snap
Selects Ethernet frame type.
DHCP/BOOTP
Enable ; Disable Selects whether selection of DHCP/
BOOTP is automatic.
RARP
Enable ; Disable Selects whether selection of RARP is
automatic.
IP ADDRESS
xxx.xxx.xxx.xxx Configures IP address of 12
alphanumeric characters.
SUBNET MASK
xxx.xxx.xxx.xxx Configures subnet mask of 12
alphanumeric characters.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Configures gateway address of 12
alphanumeric characters.
PRINT SETTINGS
ON; OFF Selects printing of network menu map.
INITIALISE
ON; OFF Selects network initialisation.