TROUBLESHOOTING > 190
Fading in patches
Longitudinal black stripes
Faint shading on unprinted sections
Blurred letter edges
Possible cause
Remedy
The paper is moist.
Store paper within specified temperature and humidity
levels.
Possible cause
Remedy
Image drum is damaged.
Replace image drum.
Toner is low.
Change toner cartridge.
Periodic black lateral
lines or spots.
If the lines or spots occur at intervals of approximately 44 -
94 mm, the image drum (green tube) is damaged or dirty. If
damaged, replace the image drum cartridge. If dirty, wipe
the image drum gently with soft tissue. If this does not
work, replace the image drum.
If the lines or spots occur at intervals of approximately 113
mm, the fuser roller is damaged. Change the fuser unit.
The image drum has been
exposed to light.
Remove the image drum from the printer and store it in a
dark place for several hours. If this does not work, replace
the image drum.
Possible cause
Remedy
Paper has been affected
by static electricity.
Store paper within specified temperature and humidity
levels.
Paper is too thick.
Use recommended paper.
Toner is low.
Change toner cartridge.
Possible cause
Remedy
LED is dirty.
Clean LED with lens cleaner or soft tissue.
Cannot print desired
colour because toner is
low.
Replace toner cartridge.
Black formation method
does not match
application.
Open the printer driver and set black formation to CMYK.
Summary of Contents for C7300
