Oki C7300 User Manual Download

Page: 37 / 216

SETTING UP > 37

Paper feed selection

The paper feed, paper size, paper weight and media type can be set
manually on the printer using the control panel as follows.

Press the

Online

button to return the printer to offline status.

Press the

Menu

button repeatedly until PRINT MENU is

displayed, then press the Select

Select

Select button.

Press the

Item

button until PAPER FEED is displayed.

Press the

Value

button until the required paper feed is

displayed, then press the Select

Select

Select button. An asterisk (*)

appears next to the selected paper feed.

NOTE

When the AUTO TRAY SWITCH is set to ON and more than one paper tray
is fitted, paper feed automatically switches to the next available paper
tray, providing non-stop printing.

Online

Item

Value

Select

Ready

Attention

Online

Item

Value

Select

Ready

Attention

Cancel

Summary of Contents for C7300

























































































































































































































Search results

Summary of Contents for C7300

Reviews:

Related manuals for C7300

Brands by name

Popular brands

Oki C7300, User Manual

Search results

Summary of Contents for C7300

Reviews:

Related manuals for C7300

Brands by name

Popular brands