OPERATION > 135
You don't need to carry out all the steps above every time you wish to
print an overlay. If the files you wish to use have already been
downloaded to the printer, you only need to carry out step
(c)
above.
This is common in many office environments, where someone has
already set up all the necessary files on the printer, and all the other
users only have to switch on the required settings in the printer driver.
CREATING DOCUMENTS TO USE AS OVERLAYS
An overlay can be created in any software application that can handle
logos, letterheads, forms, etc. and can print to file.
PCL Driver
To create a print (PRN) file:
1.
From inside your application program, choose [File] then
[Print].
2.
Ensure that the "Print To File" option is switched on in your
application's Print dialogue box.
3.
Depending on the application, you may need to select your OKI
printer model, and then click [Properties…]. This should open
the printer driver settings.
NOTE
>
The internal hard disk must be fitted to the printer to allow for
spooling of the print job before final printing.
>
If the hard disk memory is insufficient for the spooled data,
DISK
FULL
is displayed and only one copy printed.
>
If the software application being used has a collate print option,
this must be turned OFF for overlay to operate correctly.
>
An overlay may consist of more than one component file.
NOTE
Important: Please ensure that you are using the Oki PCL driver to do
this.
Summary of Contents for C7300
