Oki C7300 User Manual Download Page 187

Page: 187 / 216

TROUBLESHOOTING > 187

PRINTOUT IS GARBLED OR INCORRECT WITH PARALLEL
CONNECTION.

CANNOT PRINT.

LPT write error displayed.
PRNUSBx write error is displayed.

Possible cause

Remedy

Possible mismatch on
parallel connection
between computer and
printer.

Change parallel transmission mode (see Parallel
Transmission Mode above).

Possible cause

Remedy

Interface is disabled.

In the printer menu settings, enable Parallel or USB
interface.

Printer is switched OFF.

Switch ON.

Printer interface cable is
disconnected.

Reconnect the printer interface cable.

A converter, buffer,
extension cable or USB
hub is being used.

Test by connecting the printer and computer directly.

Printer driver output port
is incorrect.

Set correct output port to which the printer interface cable
is connected.

Printer is not selected in
the printer driver.

Select the printer or set to default printer.

Incorrect printer driver is
being used.

Delete this printer driver and install correct printer driver.

Summary of Contents for C7300

























































































































































































































Search results

Summary of Contents for C7300

Reviews:

Related manuals for C7300

Brands by name

Popular brands

Oki C7300, User Manual

Search results

Summary of Contents for C7300

Reviews:

Related manuals for C7300

Brands by name

Popular brands