Oce CS120, Reference Manual

Page: 86 / 268

Customizing the Copier’s Global Settings 2-26
.
Specifying the System Settings Password
Once a system settings password is set, settings that can only be changed by the
supervisor of the copier are protected.
NOTE
.
•
There will be no restrictions if a system settings password is not set.
•
No system settings password is specified by default.
.
1
Display the required screen as follows:
Press (Additional Functions)
➔
[Custom Settings]
➔
[ ] or [ ]
➔
[Set
System Settings Password]
If a system settings password is set, enter the password after pressing [Set
System Settings Password]; then press [OK].
2
To change or set a new system settings password, use -
(Number keys) to enter a 4-digit number for the password;
then press [OK].
You cannot store <0000> as the system settings password.
If you do not want to set a system settings password, press (Clear); then
press [OK].
NOTE
.
•
You can delete the number you entered by pressing (Clear).
3
Press [Done].
0 9
C
C
Customizing Settings to
Y
our Needs
2