Oce CS120, Reference Manual

Page: 102 / 268

Adjusting the Copier (Adjustment/Cleaning) 2-42
2
Select [On] or [Off]; then press [OK].
3
Press [Done].
.
Increasing the Resemblance of Prints to Their Counterparts
in Offset Printing (SWOP Emulation)
When printing, SWOP Emulation enables you to lower the density of halftones to
more closely match the hues produced in offset printing. This function is effective
when printing CMYK images via a print controller (option).
IMPORTANT
.
•
SWOP Emulation is available only when a print controller (option) is installed.
NOTE
.
•
This function cannot be used for copying from the platen glass or feeder (option).
•
Do not use this mode when outputting images in RGB. Using this mode with RGB
images results in a generally dull and flat-colored output.
•
For information on CMYK images and RGB images, refer to the manual of your
application software.
.
1
Display the required screen as follows:
Press (Additional Functions)
➔
[Adjustment/Cleaning]
➔
[ ] or [ ]
➔
[SWOP
Emulation]
Customizing Settings to
Y
our Needs
2