Oce CS120, Reference Manual

Page: 168 / 268

Cleaning the Copier 4-30
Cleaning the Copier
If the original is not copied clearly, clean the following parts of the copier. For high-
quality outputs, it is recommended that you clean these parts once a month.
•
Platen glass
•
Rear side of platen glass cover
WARNING
.
•
When cleaning the copier, first turn off the power switch and unplug the power
cord. Failure to do so may result in a fire or electrical shock.
•
Do not use alcohol, benzene, paint thinner or other solvents for cleaning. Doing
so might result in the plastic parts becoming deformed.
CAUTION
.
•
Unplug the power cord from the outlet at least once a year, and clean the plug’s
metal pins and the area surrounding them to ensure all dust is removed.
Allowing dust to accumulate in this area may result in a fire.
.
Originals Are Not Scanned Clearly
Clean the platen glass and the rear side of the platen glass cover by following the
procedure below.
IMPORTANT
.
•
If the platen glass or the rear side of the platen glass cover is dirty, the original may not
be scanned clearly, or the size of the original may be detected incorrectly.
T
roubleshooting
4