Oce CS120, Reference Manual

Page: 52 / 268

Entering Characters from the Touch Panel Display 1-28
3
Press [@].
<@> is displayed.
To enter a space, press [Space].
To move the cursor, press [ ] or [ ].
To enter alphabets, press [Entry Mode] to select <Uppercase>.
NOTE
.
•
If you make a mistake when entering symbols, use [ ] or [ ] to position the cursor,
then press [Backspace] to delete the symbol. Then, reenter the correct symbol.
•
You can also delete all symbols you have entered by pressing (Clear).
•
You can only enter up to 10 symbols.
4
When you are finished entering the symbols, press [OK].
.
Entering in Inches
The following example (1_1/2") shows inch entry when specifying the Zoom
Program function.
.
1
To enter 1
1
/
2
inches, press [1], [_], [1], [/], and [2] using the
number keys on the touch panel display.
The entered values are displayed as shown above.
C
Bef
ore
Y
ou Star
t Using
This Copier
1