Oce Arizona 600, User Manual

Page: 10 / 148

Océ|List of Figures
x
List of Figures
Figure 1-1 Print & Go Roller or Mandrel Holder ........... 1-3
Figure 1-2 Circuit Breaker Switch Location .................. 1-5
Figure 1-3 Battery Back-up Option ............................... 1-6
Figure 1-4 Clearance Requirements (Footprint)........... 1-9
Figure 2-1 Ink Tray (1-Gallon Bottles Shown) .............. 2-1
Figure 2-2 Cleaning Fluid or Capping Fluid
Container and Waste Container .............. 2-2
Figure 2-3 Supply Ink ................................................... 2-3
Figure 2-4 Scanning the Ink Barcode ........................... 2-3
Figure 2-5 Remove the Top Tube from the Old Filter... 2-4
Figure 2-6 Attach Tube to the New Filter...................... 2-5
Figure 2-7 Allow the Ink to Drain from the Filter
into the Supply Bottle............................... 2-5
Figure 2-8 Moving the Supply Tube from the Bottom
of the Old Filter to the New Filter ............. 2-6
Figure 3-1 Left Clip Closed........................................... 3-2
Figure 3-2 Left Clip Open ............................................. 3-2
Figure 3-3 Media Support System and Installing
Media on the Mandrel .............................. 3-3
Figure 3-4 Mandrel Assembly....................................... 3-4
Figure 3-5 Mandrel/Media Assembly on the
Support Arms........................................... 3-5
Figure 3-6 Secure the Mandrel/Media Assembly ......... 3-6
Figure 3-7 Loading Mechanism Lock Lever
in the Correct Position ............................. 3-7
Figure 3-8 Loading Mechanism Lock Lever
Out of Position ......................................... 3-7
Figure 3-9 Feeding Media Over the Platen .................. 3-8
Figure 3-10 Pinch Roller Handle .................................. 3-9
Figure 3-11 Feeding Media Over the Drive Roll ........... 3-9
Figure 3-12 Wrap Media Around the
Take-up Core......................................... 3-10
Figure 3-13 Align and Tape the Media ....................... 3-10
Figure 3-14 Rotate the Take-up Core......................... 3-11
Figure 3-15 Cutting Media Above
Take-up Dancer .................................... 3-16
Figure 3-16 Media Routing ......................................... 3-19
Figure 3-17 Media Edges Aligned .............................. 3-20