Oce Arizona 600, User Manual

Page: 62 / 148

Océ | Control Panel
4-4
• ERROR - Indicates a printer problem has occurred.
• MEDIA LOW - Indicates that media supply is below 50 feet.
• ONLINE - Indicates four status conditions:
- Solid, ready to receive a print job or keypad input
- Slow blink, printing
- Fast blink, receiving a print job
- Off, offline
0.2
Navigating from the Main Menu
Four main control panel submenus control specific functions on the printer: Copies/
Reprints, Operator, Ink Menu, and Configure I/O.
The entire menu structure can be printed using the Print Menu Tree function (see "Print
Menu Tree" on page 4-13).
0.3
Copies/Reprints
This menu (see "Copies/Reprints Menu" on page A-2) controls the number of copies and
specifies the spacing between copies made during each print job. You can also reprint copies
of a previous printed image. An on-board hard drive enables multiple images to be saved
and accessed through the control panel without reprocessing and resending the print from
the processing workstation.
0.3.1
Reprint Copies of a Previously Printed Image
Copies of a previously printed image can be reprinted using the following steps:
1. Navigate to:
MAIN MENU
copies/reprints
2. Press the ACCEPT button. You then see:
REPRINTS: [ 0 ] filename
speed, overlap, dir, res x res, width x length
Use the +/- buttons to select a previously printed image.
3. Press ACCEPT. You then see:
REPRINTS
position: (right, center, or left)
Use the +/- buttons to select the required position.