Oce Arizona 600, User Manual

Page: 36 / 148

Océ | Media System
3-8
3. Lock the mandrel on both sides of the frame.
4. Gently close the rear door completely.
3.3.2
Loading New Supply Roll
Follow the steps below for loading a new supply media roll:
1. Press the Load Media button. You then see:
Load Media
new supply roll?
2. Press ACCEPT. You then see:
Use +/- keys, attach
takeup, press ACCEPT
3. Feed the media over the supply dancer and into the vacuum platen area. To keep the
media from falling back, gently feed the media down between the back wall and the
supply dancer assembly (see Figure 3-9).
Figure 3-9 Feeding Media Over the Platen
4. Install an empty core on the take-up mandrel, and secure the hubs.
Note: Always use a take-up core the same width as the supply media core that is
installed.
Supply Dancer
Turn Bar
Back Wall