Oce Arizona 600, User Manual

Page: 116 / 148

Océ | Error Messages and Troubleshooting
6-6
SYSTEM ERROR [press ACCEPT to
restart]
TAKEUP MOTOR or ENCODER Replace the take-up roll, if empty. Check
that the take-up core is correctly installed on
the mandrel hubs. If the error does not clear,
call your authorized service representative.
SYSTEM ERROR [press ACCEPT to
restart]
SUPPLY MOTOR or ENCODER Replace the supply roll, if empty. Check that
the supply core is correctly installed on the
mandrel hubs. If the error does not clear, call
your authorized service representative.
SYSTEM ERROR [press ACCEPT to
restart]
FEED MOTOR or ENCODER Check for a possible media jam. Ensure the
pinch rollers are down. Clean the media
drive roller. If the error does not clear, call
your authorized service representative.
SYSTEM ERROR [press ACCEPT to
restart]
TAKEUP DANCER Verify the media is loaded properly,
especially on the take-up roll. If the error
does not clear, call your authorized service
representative.
SYSTEM ERROR [press ACCEPT to
restart]
SUPPLY DANCER Verify the media is loaded properly,
especially on the supply roll. If the error does
not clear, call your authorized service
representative.
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE STEPPER If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
INK VACUUM FAILURE If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
CONTROL PANEL MESSAGE EXPLANATION AND ACTION